HX-Series
MWHS — Hot Water Systems
Modular steam-based hot water generation package, supplied with indirect, direct-injection or electric heating as the duty requires.
Product overview
A packaged hot water system engineered around the actual heating duty rather than assembled on site. Plate or shell-and-tube exchangers for indirect heating, direct steam injection where the water can take steam contact, and electric heating where steam is unavailable.
The problem it solves
Site-assembled hot water sets are usually sized on a rule of thumb, controlled loosely and spread across a plant room. Temperature control drifts, the steam side is oversized, and the responsibility for performance is divided between whoever supplied each component.
Working principle
Steam is used to raise water temperature either through a heat-transfer surface or by direct injection into the water stream. Storage and recirculation are arranged to suit the draw-off pattern, and the package is completed with pumps, control valves, RTDs and panel-based control so the set point is held across the load range.
Applications
- Process heating and jacket service water
- Clean-in-place and washdown systems
- HVAC and utility hot water
- Duties requiring a single skid with integrated control
Specifications
- Size range15 NB to 300 NB
- Max pressure16 bar g
- Max temperature220 °C
- End connectionsFlanged / screwed / socket weld
- Body materialCI / CS / SS 304 / SS 316